Want to create some amazing DIY easy-to-make PCB Projects? Here is a list of the top 10 projects created with the help of PCB boards. These projects are created by people in their homes with the help of PCBWays boards and some other stuff. If you find them interesting you can make one for yourself too.
Universal Remote Control:
Universal Remote Controller is an amazing DIY project created through PCB. This remote can control wirelessly any toy, car, boat, drone, an electronic board made with easily accessible materials. This controller is easy to make.
Items Needed:
- RESISTOR 1M x 1
- RESISTORES 10K x 4
- PUSH BUTTONS x 4
- BATTERY 9V x 1
- CAPACITOR 100nF (104) x 1
- INTEGRATED CIRCUIT HT12E x 1
- MODULO TX x 1
Robotics Kit for Kids and Makers:
The project is about simplifying the way kids and makers build and test Arduino/MCU robotics-based projects. It works as a plug-and-play/test PCB, the user will plug the modules (MCU, MPU6050, Buzzer, Infrared Receiver, Servo driver) step by step and test it with the appropriate Software before running the final integration of all modules.
Items Needed:
- ARDUINO NANO x 1
- MPU-6050 Module 3 Axis Gyroscope Accelerometer Module x 1
- SparkFun buzzer (12mm) x 1
- MG90S Metal Gear RC Micro Servo Airplane Racing Car Truck Boat x 8
PicoSMARS - a Pico Powered Robot:
Meet SMARS robot, it’s a very cool robot and can do very amazing things. SMARS can move, follow a line, battle, and SMARS can also share emotions as it can smile, cry, blink, and can do other crazy stuff.
Items Needed:
- hc-sr07 ultra-sonic range finder x 1
- Raspberry Pi Pico x 1
- Dupont cables (Male to Female) x 8
- Dupont cables (Female to Female) x 6
- Lipo Battery x 1
- MX1508 Motor Driver board x 1
- 3d filament x 1
- N20 Motors (150RPM) x 2
DIY Hakko 907 Digital Soldering Station:
Build a cheap and simple DIY Digital Soldering Station, a budget-friendly Hakko 907 alternative. Enjoy the variable constant temperature feature and quick warm-up times. Its temperature range is from 27oC to 525oC and its warmup time is from about 25s to 37s (325°C).
Items Needed:
- Arduino Nano x 1
- Hakko 907 Handle x 1
- 5 Pin DIN Female Connector x 1
- 16X2 I2C LCD x 1
- LM358 Op-Amp IC x 1
- Buck Converter x 1
- IRLZ44N MOSFET x 1
- 470uF 25V Electrolytic Capacitor x 1
- 470Ω 1/4W Resistor x 1
- 2.7kΩ 1/4W Resistor x 1
- 3.3kΩ 1/4W Resistor x 1
- 10kΩ 1/4W Resistor x 1
- 10k Potentiometer x 1
- 24V 3A Power Supply x 1
- Buck Converter (MP2303) x 1
LedCade - μ arcade game cabinet - 8x8 LED matrix:
LedCade is a mini arcade game station that can play many games. The size of this arcade station is about 8x8 and it can play many games such as pong, falling, stars, invades, snake, breakout, car race, Tetris and jump arcade. It is consists of 3 buttons.
Items Needed:
- Atmega328 x 1
- 8x8 LED MATRIX best is KWM-20881ABB BLUE x 1
- PIEZO SPEAKER x 1
- BATTERY HOLDER CR2032 x 1
- Tactile switch x 3
DIY Stream Deck:
An Elgato Stream Deck is a vital tool for anyone looking to live-stream online, but the ongoing pandemic has made these devices hard to find or very expensive. To solve this problem, you can create your stream deck too. DIY Stream Deck is super easy to build and has amazing features, it has all features an Elgato Stream deck has. Do check it out and create one for yourself too.
Items Needed:
- 3.5in TFT LCD Screen
- Arduino Pro Micro
- Arduino Nano
- SD Card Breakout Board
- 6mm Push-Buttons
- Rotary Encoder with Push-Button
- Male/Female Header Kit
- Ribbon Cable
- 4GB Micro SD Card
- M2 Screw Kit
- M3 Screw Kit
- Hatchbox Black PLA
- Hatchbox White PLA
- Color Changing PLA
- Resistor Kit (Optional)
- Slow Flash RGB LEDs (Optional)
- 20x20mm Acrylic Squares
CLONEMASTER V2 (COPYBOARD V2)
This is a circuit board for copying Commodore 64 cassette tape content into blank cassette tapes. For example; with CLONEMASTER V2 (COPYBOARD V2) you can back up your original Commodore game tapes, and save them from tape jam or any other damages. This Version Clonemaster has the capability to duplicate two copies while loading the program to Commodore 64 from Master tape.
Items Needed:
- 74HC14 (DIP 14)
- DIP14 IC Socket
- 220μF 16v Radial Electrolytic Capacitor
- RED LED
- 680 Ohm 1/4 Watt Resistor
- 805 12P 2x6 pin 3.96mm Pitch Card Edge Connector
Gesture Control Robot:
Gesture Control Robot is an amazing robot that lets you control your robot with your hands. You can navigate the robot with your hand. Do check it out and create one for yourself too.
Items Needed:
- Robot Tank Chassis
- Arduino Nano V3
- L298N Motor Driver
- NRF24L01+ Antenna Module
- Adapter For NRF24L01
- 3.7v 18650 Li-ion Battery(x2)
- 18650 Battery Holder
- Breadboard
OpenBot: Turning Smartphones into Robots:
OpenBot is a cheap robot that can turn your smartphone into an amazing robot that will follow you. It will hardly cost you about 50$ but it can do some crazy stuff.
Items Needed:
- 3D-Printed Chassis
- Motor Driver
- Arduino
- Speed Sensor x 2
- Motor Tires x 4
- Battery x 3
- Smartphone
Talking / Voice Notification Warning System:
Make your warning alarm system at home. This Project will trigger an alarm when someone will came close to it or it will also say a message if someone came near to it. It is a fun Project and easy to make do check it out.
Items Needed:
- DFPlayer Mini MP3
- HC-SR505 Mini PIR
- ATmega328P-PU IC
- L7805 TO220
- Mini Speaker
- Micro SD Card 8GB
- 9V Battery Connector
- Ceramic Capacitor
- Electrolytic Capacitor
- DIP IC Sockets
- Type B USB Socket
- 12MHz Crystal
- 16MHz Crystal
- Resistor
- Switch
- LED
Post a Comment